OwlCyberSecurity - MANAGER

Edit File: dvb_frontend.h

/* * dvb_frontend.h * * The Digital TV Frontend kABI defines a driver-internal interface for * registering low-level, hardware specific driver to a hardware independent * frontend layer. * * Copyright (C) 2001 convergence integrated media GmbH * Copyright (C) 2004 convergence GmbH * * Written by Ralph Metzler * Overhauled by Holger Waechtler * Kernel I2C stuff by Michael Hunold <hunold@convergence.de> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public License * as published by the Free Software Foundation; either version 2.1 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU Lesser General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * */ #ifndef _DVB_FRONTEND_H_ #define _DVB_FRONTEND_H_ #include <linux/types.h> #include <linux/sched.h> #include <linux/ioctl.h> #include <linux/i2c.h> #include <linux/module.h> #include <linux/errno.h> #include <linux/delay.h> #include <linux/mutex.h> #include <linux/slab.h> #include <linux/bitops.h> #include <linux/dvb/frontend.h> #include <media/dvbdev.h> /* * Maximum number of Delivery systems per frontend. It * should be smaller or equal to 32 */ #define MAX_DELSYS 8 /* Helper definitions to be used at frontend drivers */ #define kHz 1000UL #define MHz 1000000UL /** * struct dvb_frontend_tune_settings - parameters to adjust frontend tuning * * @min_delay_ms: minimum delay for tuning, in ms * @step_size: step size between two consecutive frequencies * @max_drift: maximum drift * * NOTE: step_size is in Hz, for terrestrial/cable or kHz for satellite */ struct dvb_frontend_tune_settings { int min_delay_ms; int step_size; int max_drift; }; struct dvb_frontend; /** * struct dvb_tuner_info - Frontend name and min/max ranges/bandwidths * * @name: name of the Frontend * @frequency_min_hz: minimal frequency supported in Hz * @frequency_max_hz: maximum frequency supported in Hz * @frequency_step_hz: frequency step in Hz * @bandwidth_min: minimal frontend bandwidth supported * @bandwidth_max: maximum frontend bandwidth supported * @bandwidth_step: frontend bandwidth step */ struct dvb_tuner_info { char name[128]; u32 frequency_min_hz; u32 frequency_max_hz; u32 frequency_step_hz; u32 bandwidth_min; u32 bandwidth_max; u32 bandwidth_step; }; /** * struct analog_parameters - Parameters to tune into an analog/radio channel * * @frequency: Frequency used by analog TV tuner (either in 62.5 kHz step, * for TV, or 62.5 Hz for radio) * @mode: Tuner mode, as defined on enum v4l2_tuner_type * @audmode: Audio mode as defined for the rxsubchans field at videodev2.h, * e. g. V4L2_TUNER_MODE_* * @std: TV standard bitmap as defined at videodev2.h, e. g. V4L2_STD_* * * Hybrid tuners should be supported by both V4L2 and DVB APIs. This * struct contains the data that are used by the V4L2 side. To avoid * dependencies from V4L2 headers, all enums here are declared as integers. */ struct analog_parameters { unsigned int frequency; unsigned int mode; unsigned int audmode; u64 std; }; /** * enum dvbfe_algo - defines the algorithm used to tune into a channel * * @DVBFE_ALGO_HW: Hardware Algorithm - * Devices that support this algorithm do everything in hardware * and no software support is needed to handle them. * Requesting these devices to LOCK is the only thing required, * device is supposed to do everything in the hardware. * * @DVBFE_ALGO_SW: Software Algorithm - * These are dumb devices, that require software to do everything * * @DVBFE_ALGO_CUSTOM: Customizable Agorithm - * Devices having this algorithm can be customized to have specific * algorithms in the frontend driver, rather than simply doing a * software zig-zag. In this case the zigzag maybe hardware assisted * or it maybe completely done in hardware. In all cases, usage of * this algorithm, in conjunction with the search and track * callbacks, utilizes the driver specific algorithm. * * @DVBFE_ALGO_RECOVERY: Recovery Algorithm - * These devices have AUTO recovery capabilities from LOCK failure */ enum dvbfe_algo { DVBFE_ALGO_HW = BIT(0), DVBFE_ALGO_SW = BIT(1), DVBFE_ALGO_CUSTOM = BIT(2), DVBFE_ALGO_RECOVERY = BIT(31), }; /** * enum dvbfe_search - search callback possible return status * * @DVBFE_ALGO_SEARCH_SUCCESS: * The frontend search algorithm completed and returned successfully * * @DVBFE_ALGO_SEARCH_ASLEEP: * The frontend search algorithm is sleeping * * @DVBFE_ALGO_SEARCH_FAILED: * The frontend search for a signal failed * * @DVBFE_ALGO_SEARCH_INVALID: * The frontend search algorithm was probably supplied with invalid * parameters and the search is an invalid one * * @DVBFE_ALGO_SEARCH_ERROR: * The frontend search algorithm failed due to some error * * @DVBFE_ALGO_SEARCH_AGAIN: * The frontend search algorithm was requested to search again */ enum dvbfe_search { DVBFE_ALGO_SEARCH_SUCCESS = BIT(0), DVBFE_ALGO_SEARCH_ASLEEP = BIT(1), DVBFE_ALGO_SEARCH_FAILED = BIT(2), DVBFE_ALGO_SEARCH_INVALID = BIT(3), DVBFE_ALGO_SEARCH_AGAIN = BIT(4), DVBFE_ALGO_SEARCH_ERROR = BIT(31), }; /** * struct dvb_tuner_ops - Tuner information and callbacks * * @info: embedded &struct dvb_tuner_info with tuner properties * @release: callback function called when frontend is detached. * drivers should free any allocated memory. * @init: callback function used to initialize the tuner device. * @sleep: callback function used to put the tuner to sleep. * @suspend: callback function used to inform that the Kernel will * suspend. * @resume: callback function used to inform that the Kernel is * resuming from suspend. * @set_params: callback function used to inform the tuner to tune * into a digital TV channel. The properties to be used * are stored at &struct dvb_frontend.dtv_property_cache. * The tuner demod can change the parameters to reflect * the changes needed for the channel to be tuned, and * update statistics. This is the recommended way to set * the tuner parameters and should be used on newer * drivers. * @set_analog_params: callback function used to tune into an analog TV * channel on hybrid tuners. It passes @analog_parameters * to the driver. * @set_config: callback function used to send some tuner-specific * parameters. * @get_frequency: get the actual tuned frequency * @get_bandwidth: get the bandwidth used by the low pass filters * @get_if_frequency: get the Intermediate Frequency, in Hz. For baseband, * should return 0. * @get_status: returns the frontend lock status * @get_rf_strength: returns the RF signal strength. Used mostly to support * analog TV and radio. Digital TV should report, instead, * via DVBv5 API (&struct dvb_frontend.dtv_property_cache). * @get_afc: Used only by analog TV core. Reports the frequency * drift due to AFC. * @calc_regs: callback function used to pass register data settings * for simple tuners. Shouldn't be used on newer drivers. * @set_frequency: Set a new frequency. Shouldn't be used on newer drivers. * @set_bandwidth: Set a new frequency. Shouldn't be used on newer drivers. * * NOTE: frequencies used on @get_frequency and @set_frequency are in Hz for * terrestrial/cable or kHz for satellite. * */ struct dvb_tuner_ops { struct dvb_tuner_info info; void (*release)(struct dvb_frontend *fe); int (*init)(struct dvb_frontend *fe); int (*sleep)(struct dvb_frontend *fe); int (*suspend)(struct dvb_frontend *fe); int (*resume)(struct dvb_frontend *fe); /* This is the recommended way to set the tuner */ int (*set_params)(struct dvb_frontend *fe); int (*set_analog_params)(struct dvb_frontend *fe, struct analog_parameters *p); int (*set_config)(struct dvb_frontend *fe, void *priv_cfg); int (*get_frequency)(struct dvb_frontend *fe, u32 *frequency); int (*get_bandwidth)(struct dvb_frontend *fe, u32 *bandwidth); int (*get_if_frequency)(struct dvb_frontend *fe, u32 *frequency); #define TUNER_STATUS_LOCKED 1 #define TUNER_STATUS_STEREO 2 int (*get_status)(struct dvb_frontend *fe, u32 *status); int (*get_rf_strength)(struct dvb_frontend *fe, u16 *strength); int (*get_afc)(struct dvb_frontend *fe, s32 *afc); /* * This is support for demods like the mt352 - fills out the supplied * buffer with what to write. * * Don't use on newer drivers. */ int (*calc_regs)(struct dvb_frontend *fe, u8 *buf, int buf_len); /* * These are provided separately from set_params in order to * facilitate silicon tuners which require sophisticated tuning loops, * controlling each parameter separately. * * Don't use on newer drivers. */ int (*set_frequency)(struct dvb_frontend *fe, u32 frequency); int (*set_bandwidth)(struct dvb_frontend *fe, u32 bandwidth); }; /** * struct analog_demod_info - Information struct for analog TV part of the demod * * @name: Name of the analog TV demodulator */ struct analog_demod_info { char *name; }; /** * struct analog_demod_ops - Demodulation information and callbacks for * analog TV and radio * * @info: pointer to struct analog_demod_info * @set_params: callback function used to inform the demod to set the * demodulator parameters needed to decode an analog or * radio channel. The properties are passed via * &struct analog_params. * @has_signal: returns 0xffff if has signal, or 0 if it doesn't. * @get_afc: Used only by analog TV core. Reports the frequency * drift due to AFC. * @tuner_status: callback function that returns tuner status bits, e. g. * %TUNER_STATUS_LOCKED and %TUNER_STATUS_STEREO. * @standby: set the tuner to standby mode. * @release: callback function called when frontend is detached. * drivers should free any allocated memory. * @i2c_gate_ctrl: controls the I2C gate. Newer drivers should use I2C * mux support instead. * @set_config: callback function used to send some tuner-specific * parameters. */ struct analog_demod_ops { struct analog_demod_info info; void (*set_params)(struct dvb_frontend *fe, struct analog_parameters *params); int (*has_signal)(struct dvb_frontend *fe, u16 *signal); int (*get_afc)(struct dvb_frontend *fe, s32 *afc); void (*tuner_status)(struct dvb_frontend *fe); void (*standby)(struct dvb_frontend *fe); void (*release)(struct dvb_frontend *fe); int (*i2c_gate_ctrl)(struct dvb_frontend *fe, int enable); /** This is to allow setting tuner-specific configuration */ int (*set_config)(struct dvb_frontend *fe, void *priv_cfg); }; struct dtv_frontend_properties; /** * struct dvb_frontend_internal_info - Frontend properties and capabilities * * @name: Name of the frontend * @frequency_min_hz: Minimal frequency supported by the frontend. * @frequency_max_hz: Minimal frequency supported by the frontend. * @frequency_stepsize_hz: All frequencies are multiple of this value. * @frequency_tolerance_hz: Frequency tolerance. * @symbol_rate_min: Minimal symbol rate, in bauds * (for Cable/Satellite systems). * @symbol_rate_max: Maximal symbol rate, in bauds * (for Cable/Satellite systems). * @symbol_rate_tolerance: Maximal symbol rate tolerance, in ppm * (for Cable/Satellite systems). * @caps: Capabilities supported by the frontend, * as specified in &enum fe_caps. */ struct dvb_frontend_internal_info { char name[128]; u32 frequency_min_hz; u32 frequency_max_hz; u32 frequency_stepsize_hz; u32 frequency_tolerance_hz; u32 symbol_rate_min; u32 symbol_rate_max; u32 symbol_rate_tolerance; enum fe_caps caps; }; /** * struct dvb_frontend_ops - Demodulation information and callbacks for * ditialt TV * * @info: embedded &struct dvb_tuner_info with tuner properties * @delsys: Delivery systems supported by the frontend * @detach: callback function called when frontend is detached. * drivers should clean up, but not yet free the &struct * dvb_frontend allocation. * @release: callback function called when frontend is ready to be * freed. * drivers should free any allocated memory. * @release_sec: callback function requesting that the Satellite Equipment * Control (SEC) driver to release and free any memory * allocated by the driver. * @init: callback function used to initialize the tuner device. * @sleep: callback function used to put the tuner to sleep. * @write: callback function used by some demod legacy drivers to * allow other drivers to write data into their registers. * Should not be used on new drivers. * @tune: callback function used by demod drivers that use * @DVBFE_ALGO_HW to tune into a frequency. * @get_frontend_algo: returns the desired hardware algorithm. * @set_frontend: callback function used to inform the demod to set the * parameters for demodulating a digital TV channel. * The properties to be used are stored at &struct * dvb_frontend.dtv_property_cache. The demod can change * the parameters to reflect the changes needed for the * channel to be decoded, and update statistics. * @get_tune_settings: callback function * @get_frontend: callback function used to inform the parameters * actuall in use. The properties to be used are stored at * &struct dvb_frontend.dtv_property_cache and update * statistics. Please notice that it should not return * an error code if the statistics are not available * because the demog is not locked. * @read_status: returns the locking status of the frontend. * @read_ber: legacy callback function to return the bit error rate. * Newer drivers should provide such info via DVBv5 API, * e. g. @set_frontend;/@get_frontend, implementing this * callback only if DVBv3 API compatibility is wanted. * @read_signal_strength: legacy callback function to return the signal * strength. Newer drivers should provide such info via * DVBv5 API, e. g. @set_frontend/@get_frontend, * implementing this callback only if DVBv3 API * compatibility is wanted. * @read_snr: legacy callback function to return the Signal/Noise * rate. Newer drivers should provide such info via * DVBv5 API, e. g. @set_frontend/@get_frontend, * implementing this callback only if DVBv3 API * compatibility is wanted. * @read_ucblocks: legacy callback function to return the Uncorrected Error * Blocks. Newer drivers should provide such info via * DVBv5 API, e. g. @set_frontend/@get_frontend, * implementing this callback only if DVBv3 API * compatibility is wanted. * @diseqc_reset_overload: callback function to implement the * FE_DISEQC_RESET_OVERLOAD() ioctl (only Satellite) * @diseqc_send_master_cmd: callback function to implement the * FE_DISEQC_SEND_MASTER_CMD() ioctl (only Satellite). * @diseqc_recv_slave_reply: callback function to implement the * FE_DISEQC_RECV_SLAVE_REPLY() ioctl (only Satellite) * @diseqc_send_burst: callback function to implement the * FE_DISEQC_SEND_BURST() ioctl (only Satellite). * @set_tone: callback function to implement the * FE_SET_TONE() ioctl (only Satellite). * @set_voltage: callback function to implement the * FE_SET_VOLTAGE() ioctl (only Satellite). * @enable_high_lnb_voltage: callback function to implement the * FE_ENABLE_HIGH_LNB_VOLTAGE() ioctl (only Satellite). * @dishnetwork_send_legacy_command: callback function to implement the * FE_DISHNETWORK_SEND_LEGACY_CMD() ioctl (only Satellite). * Drivers should not use this, except when the DVB * core emulation fails to provide proper support (e.g. * if @set_voltage takes more than 8ms to work), and * when backward compatibility with this legacy API is * required. * @i2c_gate_ctrl: controls the I2C gate. Newer drivers should use I2C * mux support instead. * @ts_bus_ctrl: callback function used to take control of the TS bus. * @set_lna: callback function to power on/off/auto the LNA. * @search: callback function used on some custom algo search algos. * @tuner_ops: pointer to &struct dvb_tuner_ops * @analog_ops: pointer to &struct analog_demod_ops */ struct dvb_frontend_ops { struct dvb_frontend_internal_info info; u8 delsys[MAX_DELSYS]; void (*detach)(struct dvb_frontend *fe); void (*release)(struct dvb_frontend* fe); void (*release_sec)(struct dvb_frontend* fe); int (*init)(struct dvb_frontend* fe); int (*sleep)(struct dvb_frontend* fe); int (*write)(struct dvb_frontend* fe, const u8 buf[], int len); /* if this is set, it overrides the default swzigzag */ int (*tune)(struct dvb_frontend* fe, bool re_tune, unsigned int mode_flags, unsigned int *delay, enum fe_status *status); /* get frontend tuning algorithm from the module */ enum dvbfe_algo (*get_frontend_algo)(struct dvb_frontend *fe); /* these two are only used for the swzigzag code */ int (*set_frontend)(struct dvb_frontend *fe); int (*get_tune_settings)(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* settings); int (*get_frontend)(struct dvb_frontend *fe, struct dtv_frontend_properties *props); int (*read_status)(struct dvb_frontend *fe, enum fe_status *status); int (*read_ber)(struct dvb_frontend* fe, u32* ber); int (*read_signal_strength)(struct dvb_frontend* fe, u16* strength); int (*read_snr)(struct dvb_frontend* fe, u16* snr); int (*read_ucblocks)(struct dvb_frontend* fe, u32* ucblocks); int (*diseqc_reset_overload)(struct dvb_frontend* fe); int (*diseqc_send_master_cmd)(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd); int (*diseqc_recv_slave_reply)(struct dvb_frontend* fe, struct dvb_diseqc_slave_reply* reply); int (*diseqc_send_burst)(struct dvb_frontend *fe, enum fe_sec_mini_cmd minicmd); int (*set_tone)(struct dvb_frontend *fe, enum fe_sec_tone_mode tone); int (*set_voltage)(struct dvb_frontend *fe, enum fe_sec_voltage voltage); int (*enable_high_lnb_voltage)(struct dvb_frontend* fe, long arg); int (*dishnetwork_send_legacy_command)(struct dvb_frontend* fe, unsigned long cmd); int (*i2c_gate_ctrl)(struct dvb_frontend* fe, int enable); int (*ts_bus_ctrl)(struct dvb_frontend* fe, int acquire); int (*set_lna)(struct dvb_frontend *); /* * These callbacks are for devices that implement their own * tuning algorithms, rather than a simple swzigzag */ enum dvbfe_search (*search)(struct dvb_frontend *fe); struct dvb_tuner_ops tuner_ops; struct analog_demod_ops analog_ops; }; #ifdef __DVB_CORE__ #define MAX_EVENT 8 /* Used only internally at dvb_frontend.c */ struct dvb_fe_events { struct dvb_frontend_event events[MAX_EVENT]; int eventw; int eventr; int overflow; wait_queue_head_t wait_queue; struct mutex mtx; }; #endif /** * struct dtv_frontend_properties - contains a list of properties that are * specific to a digital TV standard. * * @frequency: frequency in Hz for terrestrial/cable or in kHz for * Satellite * @modulation: Frontend modulation type * @voltage: SEC voltage (only Satellite) * @sectone: SEC tone mode (only Satellite) * @inversion: Spectral inversion * @fec_inner: Forward error correction inner Code Rate * @transmission_mode: Transmission Mode * @bandwidth_hz: Bandwidth, in Hz. A zero value means that userspace * wants to autodetect. * @guard_interval: Guard Interval * @hierarchy: Hierarchy * @symbol_rate: Symbol Rate * @code_rate_HP: high priority stream code rate * @code_rate_LP: low priority stream code rate * @pilot: Enable/disable/autodetect pilot tones * @rolloff: Rolloff factor (alpha) * @delivery_system: FE delivery system (e. g. digital TV standard) * @interleaving: interleaving * @isdbt_partial_reception: ISDB-T partial reception (only ISDB standard) * @isdbt_sb_mode: ISDB-T Sound Broadcast (SB) mode (only ISDB standard) * @isdbt_sb_subchannel: ISDB-T SB subchannel (only ISDB standard) * @isdbt_sb_segment_idx: ISDB-T SB segment index (only ISDB standard) * @isdbt_sb_segment_count: ISDB-T SB segment count (only ISDB standard) * @isdbt_layer_enabled: ISDB Layer enabled (only ISDB standard) * @layer: ISDB per-layer data (only ISDB standard) * @layer.segment_count: Segment Count; * @layer.fec: per layer code rate; * @layer.modulation: per layer modulation; * @layer.interleaving: per layer interleaving. * @stream_id: If different than zero, enable substream filtering, if * hardware supports (DVB-S2 and DVB-T2). * @scrambling_sequence_index: Carries the index of the DVB-S2 physical layer * scrambling sequence. * @atscmh_fic_ver: Version number of the FIC (Fast Information Channel) * signaling data (only ATSC-M/H) * @atscmh_parade_id: Parade identification number (only ATSC-M/H) * @atscmh_nog: Number of MH groups per MH subframe for a designated * parade (only ATSC-M/H) * @atscmh_tnog: Total number of MH groups including all MH groups * belonging to all MH parades in one MH subframe * (only ATSC-M/H) * @atscmh_sgn: Start group number (only ATSC-M/H) * @atscmh_prc: Parade repetition cycle (only ATSC-M/H) * @atscmh_rs_frame_mode: Reed Solomon (RS) frame mode (only ATSC-M/H) * @atscmh_rs_frame_ensemble: RS frame ensemble (only ATSC-M/H) * @atscmh_rs_code_mode_pri: RS code mode pri (only ATSC-M/H) * @atscmh_rs_code_mode_sec: RS code mode sec (only ATSC-M/H) * @atscmh_sccc_block_mode: Series Concatenated Convolutional Code (SCCC) * Block Mode (only ATSC-M/H) * @atscmh_sccc_code_mode_a: SCCC code mode A (only ATSC-M/H) * @atscmh_sccc_code_mode_b: SCCC code mode B (only ATSC-M/H) * @atscmh_sccc_code_mode_c: SCCC code mode C (only ATSC-M/H) * @atscmh_sccc_code_mode_d: SCCC code mode D (only ATSC-M/H) * @lna: Power ON/OFF/AUTO the Linear Now-noise Amplifier (LNA) * @strength: DVBv5 API statistics: Signal Strength * @cnr: DVBv5 API statistics: Signal to Noise ratio of the * (main) carrier * @pre_bit_error: DVBv5 API statistics: pre-Viterbi bit error count * @pre_bit_count: DVBv5 API statistics: pre-Viterbi bit count * @post_bit_error: DVBv5 API statistics: post-Viterbi bit error count * @post_bit_count: DVBv5 API statistics: post-Viterbi bit count * @block_error: DVBv5 API statistics: block error count * @block_count: DVBv5 API statistics: block count * * NOTE: derivated statistics like Uncorrected Error blocks (UCE) are * calculated on userspace. * * Only a subset of the properties are needed for a given delivery system. * For more info, consult the media_api.html with the documentation of the * Userspace API. */ struct dtv_frontend_properties { u32 frequency; enum fe_modulation modulation; enum fe_sec_voltage voltage; enum fe_sec_tone_mode sectone; enum fe_spectral_inversion inversion; enum fe_code_rate fec_inner; enum fe_transmit_mode transmission_mode; u32 bandwidth_hz; /* 0 = AUTO */ enum fe_guard_interval guard_interval; enum fe_hierarchy hierarchy; u32 symbol_rate; enum fe_code_rate code_rate_HP; enum fe_code_rate code_rate_LP; enum fe_pilot pilot; enum fe_rolloff rolloff; enum fe_delivery_system delivery_system; enum fe_interleaving interleaving; /* ISDB-T specifics */ u8 isdbt_partial_reception; u8 isdbt_sb_mode; u8 isdbt_sb_subchannel; u32 isdbt_sb_segment_idx; u32 isdbt_sb_segment_count; u8 isdbt_layer_enabled; struct { u8 segment_count; enum fe_code_rate fec; enum fe_modulation modulation; u8 interleaving; } layer[3]; /* Multistream specifics */ u32 stream_id; /* Physical Layer Scrambling specifics */ u32 scrambling_sequence_index; /* ATSC-MH specifics */ u8 atscmh_fic_ver; u8 atscmh_parade_id; u8 atscmh_nog; u8 atscmh_tnog; u8 atscmh_sgn; u8 atscmh_prc; u8 atscmh_rs_frame_mode; u8 atscmh_rs_frame_ensemble; u8 atscmh_rs_code_mode_pri; u8 atscmh_rs_code_mode_sec; u8 atscmh_sccc_block_mode; u8 atscmh_sccc_code_mode_a; u8 atscmh_sccc_code_mode_b; u8 atscmh_sccc_code_mode_c; u8 atscmh_sccc_code_mode_d; u32 lna; /* statistics data */ struct dtv_fe_stats strength; struct dtv_fe_stats cnr; struct dtv_fe_stats pre_bit_error; struct dtv_fe_stats pre_bit_count; struct dtv_fe_stats post_bit_error; struct dtv_fe_stats post_bit_count; struct dtv_fe_stats block_error; struct dtv_fe_stats block_count; }; #define DVB_FE_NO_EXIT 0 #define DVB_FE_NORMAL_EXIT 1 #define DVB_FE_DEVICE_REMOVED 2 #define DVB_FE_DEVICE_RESUME 3 /** * struct dvb_frontend - Frontend structure to be used on drivers. * * @refcount: refcount to keep track of &struct dvb_frontend * references * @ops: embedded &struct dvb_frontend_ops * @dvb: pointer to &struct dvb_adapter * @demodulator_priv: demod private data * @tuner_priv: tuner private data * @frontend_priv: frontend private data * @sec_priv: SEC private data * @analog_demod_priv: Analog demod private data * @dtv_property_cache: embedded &struct dtv_frontend_properties * @callback: callback function used on some drivers to call * either the tuner or the demodulator. * @id: Frontend ID * @exit: Used to inform the DVB core that the frontend * thread should exit (usually, means that the hardware * got disconnected. */ struct dvb_frontend { struct kref refcount; struct dvb_frontend_ops ops; struct dvb_adapter *dvb; void *demodulator_priv; void *tuner_priv; void *frontend_priv; void *sec_priv; void *analog_demod_priv; struct dtv_frontend_properties dtv_property_cache; #define DVB_FRONTEND_COMPONENT_TUNER 0 #define DVB_FRONTEND_COMPONENT_DEMOD 1 int (*callback)(void *adapter_priv, int component, int cmd, int arg); int id; unsigned int exit; }; /** * dvb_register_frontend() - Registers a DVB frontend at the adapter * * @dvb: pointer to &struct dvb_adapter * @fe: pointer to &struct dvb_frontend * * Allocate and initialize the private data needed by the frontend core to * manage the frontend and calls dvb_register_device() to register a new * frontend. It also cleans the property cache that stores the frontend * parameters and selects the first available delivery system. */ int dvb_register_frontend(struct dvb_adapter *dvb, struct dvb_frontend *fe); /** * dvb_unregister_frontend() - Unregisters a DVB frontend * * @fe: pointer to &struct dvb_frontend * * Stops the frontend kthread, calls dvb_unregister_device() and frees the * private frontend data allocated by dvb_register_frontend(). * * NOTE: This function doesn't frees the memory allocated by the demod, * by the SEC driver and by the tuner. In order to free it, an explicit call to * dvb_frontend_detach() is needed, after calling this function. */ int dvb_unregister_frontend(struct dvb_frontend *fe); /** * dvb_frontend_detach() - Detaches and frees frontend specific data * * @fe: pointer to &struct dvb_frontend * * This function should be called after dvb_unregister_frontend(). It * calls the SEC, tuner and demod release functions: * &dvb_frontend_ops.release_sec, &dvb_frontend_ops.tuner_ops.release, * &dvb_frontend_ops.analog_ops.release and &dvb_frontend_ops.release. * * If the driver is compiled with %CONFIG_MEDIA_ATTACH, it also decreases * the module reference count, needed to allow userspace to remove the * previously used DVB frontend modules. */ void dvb_frontend_detach(struct dvb_frontend *fe); /** * dvb_frontend_suspend() - Suspends a Digital TV frontend * * @fe: pointer to &struct dvb_frontend * * This function prepares a Digital TV frontend to suspend. * * In order to prepare the tuner to suspend, if * &dvb_frontend_ops.tuner_ops.suspend\(\) is available, it calls it. Otherwise, * it will call &dvb_frontend_ops.tuner_ops.sleep\(\), if available. * * It will also call &dvb_frontend_ops.sleep\(\) to put the demod to suspend. * * The drivers should also call dvb_frontend_suspend\(\) as part of their * handler for the &device_driver.suspend\(\). */ int dvb_frontend_suspend(struct dvb_frontend *fe); /** * dvb_frontend_resume() - Resumes a Digital TV frontend * * @fe: pointer to &struct dvb_frontend * * This function resumes the usual operation of the tuner after resume. * * In order to resume the frontend, it calls the demod &dvb_frontend_ops.init\(\). * * If &dvb_frontend_ops.tuner_ops.resume\(\) is available, It, it calls it. * Otherwise,t will call &dvb_frontend_ops.tuner_ops.init\(\), if available. * * Once tuner and demods are resumed, it will enforce that the SEC voltage and * tone are restored to their previous values and wake up the frontend's * kthread in order to retune the frontend. * * The drivers should also call dvb_frontend_resume() as part of their * handler for the &device_driver.resume\(\). */ int dvb_frontend_resume(struct dvb_frontend *fe); /** * dvb_frontend_reinitialise() - forces a reinitialisation at the frontend * * @fe: pointer to &struct dvb_frontend * * Calls &dvb_frontend_ops.init\(\) and &dvb_frontend_ops.tuner_ops.init\(\), * and resets SEC tone and voltage (for Satellite systems). * * NOTE: Currently, this function is used only by one driver (budget-av). * It seems to be due to address some special issue with that specific * frontend. */ void dvb_frontend_reinitialise(struct dvb_frontend *fe); /** * dvb_frontend_sleep_until() - Sleep for the amount of time given by * add_usec parameter * * @waketime: pointer to &struct ktime_t * @add_usec: time to sleep, in microseconds * * This function is used to measure the time required for the * FE_DISHNETWORK_SEND_LEGACY_CMD() ioctl to work. It needs to be as precise * as possible, as it affects the detection of the dish tone command at the * satellite subsystem. * * Its used internally by the DVB frontend core, in order to emulate * FE_DISHNETWORK_SEND_LEGACY_CMD() using the &dvb_frontend_ops.set_voltage\(\) * callback. * * NOTE: it should not be used at the drivers, as the emulation for the * legacy callback is provided by the Kernel. The only situation where this * should be at the drivers is when there are some bugs at the hardware that * would prevent the core emulation to work. On such cases, the driver would * be writing a &dvb_frontend_ops.dishnetwork_send_legacy_command\(\) and * calling this function directly. */ void dvb_frontend_sleep_until(ktime_t *waketime, u32 add_usec); #endif